SA-QY90KN 220KV OPGW ADSS Hydraulic Cable Puller Stringing
Equipment
90KN Cable Puller Stringing Equipment
The 220KV Hydraulic Cable Puller Stringing Equipment comprise of 9
ton hydraulic puller and 8 ton (2X40KN) or 7 Ton hydraulic
tensioners
for 2 bundled conductors.
90KN Cable Puller Stringing Equipment Features:
- Closed hydraulic circuit,infinitely variable speed control in
both rotating directions.
- The max pulling force for stringing operation can be preset,
pulling force in the rope can be read on the line pull gauge.
- Automatic over pulling protection system
- Spring applied hydraulic released brake acts automatically in
case of hydraulic failure to ensure safety.
- Hydraulic oil cooling system.
- Heat treated wear-proof bull wheels
- With rigid axle for towing at high speed, the machine looks
beautiful.
- Hydraulic actuated pulling rope clamp for convenient reel change.
- Integral self-loading reel winder with automatic level wind.
90KN Cable Puller Stringing Equipment Performance :
Max intermittent pull 90kN Max continuous pull 80kN Speed at max pull 2.5km/h Max speed 5km/h Pull at max speed 40kN |
90KN Cable Puller Stringing Equipment Engine :
Diesel 118kw(158hp) Cooling system water Electrical system 24V |
90KN Cable Puller Stringing Equipment Characteristics :Bull-wheel diameter 540mm Groove number 8 Max rope diameter 21mm Max diameter of rope reel 1400mm Total weight 4280kg Overall dimension 4250×2100×2500mm |
90KN Cable Puller Stringing Equipment Main Configuration :Engine Cummins Main pump German Rexroth Main motor speed reducer German Rexroth Tail bracket hoisting motor American Eton Hydraulic meter German WIKA Operating handle German Rexroth |
Configuration :
·Hydraulic dynamometer with set-point and automatic control of
maximum pull
·Hydraulic oil cooling system
·Control instruments for hydraulic system and diesel engine
·On board reel winder with automatic level wind, suitable for
standard reel mod. 1100 and 1400
·Hydraulic front stabilizer
·Grounding connection point
Hydraulic Transmission :
Closed hydraulic circuit for step less speed variation in both
rotating directions. This machine is provided
with a pull pro-setting system that maintains the pre-set pulling
value (also when the speed is reduced
to "0") by automatically adjusting the operation speed according to
the friction and unexpected loads
which may occur.
Additional Devices :
·Lighting system for the trailer
·Hydraulic rope clamp for reel change
·Swivel guide rope roller
·Trailer for towing at max speed of 30 km/h
·Extra shaft
·Digital speed and meter counter (extra charge)
